Key Blanks for Sargent and Corbin padlocks wanted

Adrian Weber

Here are some pictures of padlocks I still need keys for. Any help is appreciated 🙂

I will add another picture of a small Yale padlock tomorrow!

Dean Nickel

On the corbin is the keyway have both of the wardings square? or is the upper one a V? If it is both square it is a Corbin 99 keyway. If it has a V on the upper warding it is a Corbin 97 keyway.

The other is a standard flat key… those are hard to find in OEM or after market in brass. Steel is about the only thing to be had. That makes it hard to fit keys.

GWiens2001

The blanks for your Sargent can be found. Have one in front of me. I’ll stop by the locksmith shop I got it from tomorrow and see get you the manufacturer and blank number, as there is no number on it.

Gordon

Dean Nickel

It looks like Ilco makes one that might work. It is listed under Yale in the steel blanks. Ilco #1031 and it is nickel silver brass. Hard but someone should be able to impression with that. There is also a blank 94 that is brass but is shorter and I don’t know would be long enough. Please note that the keys are .040/1.0mm thick and .290/7.37mm tall for the 94 and .040/1.0mm thick and .285/7.2mm tall for the 1031. So measure the keyway and see if it is about one of those sizes.

jeffmoss26

Corbin padlock should be a 99 keyway. I have one just like it on my bench.

Adrian Weber

Sorry for the late reply and thanks for the big help so far!

Gordon if you could help me on the 4 pin Sargent blank it would be most appreciated!
Dean you are still talking about the Corbin right? I will try to post a picture with measures within this week.

Dean Nickel

I know that padlock well enough. It came in whatever keyway it was ordered in to match door hardware. So I think it is a 99 keyway and I have it.

Timothy

Well I have two padlock almost like dicey. The Sargent padlock with patent June 16 TM 1912 with chain. The key by using 1064A blank with blade file off to fit in the plug. I did find the right blank for it but sorry don’t know what the key number it. I also has Corbin padlock this is one of the hard padlock to impression the key as the pin are small ball bearing. One of these hoping to get working key for it. The key that will work using 1000DA as file the shoulder of to get key in all the way.

Adrian Weber

Thanks for your post Timothy, some nice padlocks you got there 🙂
My keyway on the Sargent is flat though.

Hey Dean, I will check with my locksmith by the End of this week if eh has the Corbin 99 keyway blank and maybe also a blank keyway blank for the Sargent. No idea if he has these though but we will see!

Adrian Weber

I was finally able to check in with my locksmith but sadly he did not have the blanks.

Adrian Weber

I have checked again with another catalog that I found in my own stuff.

The keyway looks more like the 99.

Sublimis

Adrian Weber wrote
I have checked again with another catalog that I found in my own stuff.

The keyway looks more like the 99.

Adrian, you posted the pictures of the keyway in the correct orientation. 🙁clap):😃:

[unknown]