Masterlock key blank

Donnie

#47 Masterlock key blanks needed

Hello All: I’ll preface my query by stating that I an NOT A COLLECTOR OF MASTERLOCK’S… but I do have a liking for 1940’s & 1950’s bicycle padlocks.. I recently picked up a #47 bike lock (long shackle) & discovered that the groove in the key blank that I am searching for is not the same as a short shackle #47.. The blank that I need has the groove on the left side …….like a #48.. can any one help me . I would like to find 2 or 3 so I can key this lock……………Donnie🙁sweat):

Pschiffe

Donnie wrote
Hello All: I’ll preface my query by stating that I an NOT A COLLECTOR OF MASTERLOCK’S… but I do have a liking for 1940’s & 1950’s bicycle padlocks.. I recently picked up a #47 bike lock (long shackle) & discovered that the groove in the key blank that I am searching for is not the same as a short shackle #47.. The blank that I need has the groove on the left side …….like a #48.. can any one help me . I would like to find 2 or 3 so I can key this lock……………Donnie🙁sweat):

I believe those two blanks are long obsolete, Old Ilco 1331 which crosses to Graham 2765C and Old Ilco 1331R which crosses to 453 Curtis and 2756CR Graham. Thumbnail of 1331R attached, system wouldn’t let me upload my second image for some reason, but 1331 is the opposite.

Pete Schifferli

[unknown]

Donnie

Thanks Pete, I am hoping that someone may have a couple hanging on a board somewhere in in the “old key” section of their shop.
I do appreciate the #'s that you offered as I call around, my search will be easier… Not many old timers in my section of USA… donnie

Donnie

Pete, just to be certain, the image that you show is NOT the blank that I need.. correct?? my slot is on the left side of the keyhole as you face the lock……. same as a # 48 short shackle lock………..Donnie

Pschiffe

Donnie wrote
Pete, just to be certain, the image that you show is NOT the blank that I need.. correct?? my slot is on the left side of the keyhole as you face the lock……. same as a # 48 short shackle lock………..Donnie

Here is the image of the Old Ilco 1331, see thumbnail.

Pete

[unknown]

Donnie

That’s the one Pete , THANKS for your help…🙁clap):. now if any one has a couple laying around, yea, probably not..but I’m hoping..Donnie

                                    #1331 Ilco   anyone??

nathanbonstein

i have a few 47’s and 48’s and there is right and left keys in some of each. i do have masterlock co blanks for right and left
i think i marked them right ? there is a light rust on them, pm me with l or r and where to send 2 of them

Donnie

A BIG thank you to Nathan Bonstein for coming thru for me on the Masterkey search………….I’m on my way now……..Donnie 🙁happy):

nathanbonstein

your quite welcome